Panelcraft Access Panels have developed the Firepan Range to provide an effective solution to gain access to building engineering services concealed in wall structures which serve fire protection or separation purposes.
|CODE||PANEL SIZE||STRUCTURAL OPENING||CLEAR OPENING ONCE INSTALLED||DEPTH||WEIGHT|
|Fire Rated BF150||150 x 150mm||160 x 160mm||75 x 80mm||50mm||2.6kg|
|Fire Rated BF200||200 x 200mm||210 x 210mm||120 x 140mm||50mm||4.3kg|
|Fire Rated BF300||300 x 300mm||310 x 310mm||220 x 264mm||50mm||5.6kg|
|Fire Rated BF350||350 x 350mm||360 x 360mm||270 x 314mm||50mm||7.7kg|
|Fire Rated BF450||450 x 450mm||460 x 460mm||370 x 412mm||50mm||10.6kg|
|Fire Rated BF550||550 x 550mm||560 x 560mm||470 x 514mm||50mm||12.0kg|
|Fire Rated BF600*-300||600 x 300mm||610 x 310mm||565 x 235mm||50mm||6.7kg|
|Fire Rated BF600||600 x 600mm||610 x 610mm||520 x 564mm||50mm||16.9kg|
* Hinged on the longer side.
* Maximum Size 2280 x 1100mm
❑ The panel is made to fit into the opening (the outer frame is an extra 25mm on each side)25mm picture frame (projects beyond the face of the opening), 50mm deep panel (depth into the opening)
❑ 120 minute fire rating suitable for a wide range of applications including Gas Flue inspection hatches
❑ Colour white polyester powder coating, RAL9010 with 20% gloss
❑ Tested to B.S.476: Part 22:1987 and Part J Compliant
❑ Available with Budget Lock (square end T-Key) or Tamper Proof Lock (at extra cost)
❑ 36dB sound reduction rating
❑ Dual purpose for either walls or ceilings
❑ Zintec steel for a corrosion resistant finish
❑ Product made to order, please note this item is non-returnable
Structural Opening to be formed Level, Plumb and Square
The structural Opening should be lined with 12.5mm Fireline board.
The aperture after lining is fitted should be 10mm greater than the panel.
For example, a 2300 x 950 panel needs a structural opening of 2310 x 960 after being lined with the Fireline board
Insert the Frame into the opening.
Fix Frame using a 75mm steel screws using the pre punched holes in the frame on all four sides (do not fully tighten).
Ensure equal gap around all sides of the Frame Then fully screw fix ensuring the frame remains square and plumb. Ensure all fixings are solid but do not over tighten as this could distort the frame.
Apply a 5mm wide bead of Intumescent Sealant (2 Hours Minimum Rated)
to the back edge of the frame /aperture lining connection.
On larger doors it is advised the door is removed from the frame by unbolting the door and lifting from the hinge studs. Re hang the door once the frame is fixed and secure. Ensuring gap is equal top and bottom before re bolting the door into the frame.
Type a value in the Inches field to convert the value to mm: