Loft Hatch LT

The LT Loft Hatch is Compression fitted, with two Insulation options. Flat lid Loft Hatch with decorative frame.



Further Information

  • ❑  Lid hinged on short side of frame, to open twist the catch and open lid downwards
  • ❑  Fitted with draught seals

  • ❑  Choose between budget 35mm insulation or 55mm insulation (Part L compliant)
  • ❑  Fits a minimum structural opening of 560x720mm (Can be fitted up to 580x740mm)
  • ❑  Clear opening when installed (LT2 533x655mm, LT235 533x635mm)
  • ❑  Overall frame size 675x830mm
  • ❑  Maintenance free
  • ❑  Has an identation injection moulding mark in the centre of the door, please refer to the thumbnail image
  • ❑  Guaranteed not to dis-colour
  • ❑  Easy to fit


Stock Sizes

 CODE  MINIMUM STRUCTURAL OPENING  CLEAR OPENING ONCE INSTALLED  OVERALL FRAME SIZE "U" Value  DEPTH 
 LT2  560 x 720mm  533 x 655mm  675 x 830mm  0.78  35mm
 LT235  560 x 720mm  533 x 635mm  675 x 830mm  0.35  55mm


More Information

Product description

❑  Hinged loft hatch: Decorative frame with flat lid. Frame is fitted with compression seals to prevent draughts between the frame and the lid. When closed the lid is compressed against draught seals. Easy to open and close with simple turn of the catch. Made from white injection moulded plastic, requires no decorating or maintenance.

Insulation and U Values explained

❑  This loft hatch has a choice of two insulation options so you can tailor your hatch to suit your budget. insulation requirements. the thermal efficiency of insulation is represented by its U Value, the lower the number the more effective the insulation. The insulation values for the Laddatrap loft hatch range are listed below by model reference:

❑  LT2 - U Value 0.78 (Budget choice)

❑  LT235 - U Value 0.35 (Complies with Part L of Building Regulations)

❑  Part L of Building Regulations, please note, the current building regulations for new build properties require hatches to have a U Value of 0.35. You are under no obligation to match this, however a well insulated loft hatch can help reduce your heating requirements and reduce your heating bills and Carbon emissions.

❑  Fitting information, the hatch has pre-formed screw holes in the frame. Easy to DIY fit, offer the frame up to the loft opening and screw fix (fixing screws are supplied with your hatch) into frame.

Note: there is a visible extrusion point in the lid of these hatches. See photos for details



LoftHatchLT Technical Drawing


FITTING INSTRUCTIONS FOR 600mm JOIST CENTRES

LT2 DROP-DOWN TRAP

Preparation

Trim out a suitable opening and fix noggins between trusses to form a clear opening of 722x562mm.

Fitting

With hatch open offer the frame up into the opening, pushing tightly upwards to ceiling, then fix using 50mm long woodscrews (provided) through 4No. hole-tabs on longside (do not over tighten). After ensuring frame is fixed squarely, fix remaining 4 screws through hole-tabs on the shortside. Close hatch with thumbturn.




LENGTH CONVERTER

Type a value in the Inches field to convert the value to mm:

mm

NEED FURTHER ASSISTANCE?

SHARE US

Instagram
Pinterest
MADE IN THE UK




Further Related products



Loft Hatch SD




MORE INFORMATION
Loft Hatch LT




MORE INFORMATION
Loft Hatch PD




MORE INFORMATION
Loft Hatch AT




MORE INFORMATION