Click thumbnails to enlarge images.

Firepan Budget PF120

High quality 2-Hour Fire Rated, 3 Point Locking, Picture Frame Access Panel.

Further Information

❑ Bespoke sizes up to 2000 x 1300mm double door
❑ Bespoke sizes up to 2000 x 800mm single door
❑ 3 point locking on lead leaf
❑ 120 minute fire tested to BS476 Part 22 in one direction (opening into fire)

❑ Smoke tested to BS EN1634 : 2004
❑ Powder coated 0.9mm zintec steel
❑ 50mm deep
❑ Picture Frame (Beaded frame available)

Stock Panel Sizes

NONE AVAILABLE - BESPOKE MADE TO ORDER ONLY

* Bespoke panels made to order

* Maximum Size 2000 x 1200mm

Product Details

❑ Bespoke sizes up to 2000 x 1300mm double door
❑ Bespoke sizes up to 2000 x 800mm single door
❑ 3 point locking on lead leaf
❑ 120 minute fire tested to BS476 Part 22 in one direction (opening into fire)
❑ Smoke tested to BS EN1634 : 2004
❑ Powder coated 0.9mm zintec steel
❑ 50mm deep
❑ Picture Frame (Beaded frame available)

Technical Specification

Fitting the Product

Fitting Instructions Budget Firepan (Wall)

❑ Form a finished opening in the wall 10mm greater than the panel to be installed, ie 300 x 300 panel opening 310 x 310, using a 12.5mm plasterboard lining inside the opening.

❑ Remove door from frame if the access panel is heavy or has a simulated beaded frame for tape and jointing.

❑ Fix the access panel to the framework of timber or metal studwork through the pre-punched holes in the side of the frame using 75mm British Gypsum Steel Drywall Screws.

❑ Ensure the frame is fitted square and plumb.

❑ Replace door (if removed) ensure equal gap around all sides of the door.

❑ For simulated beaded frame tape and joint over frame edge then replace the door.